How to Clean Vinyl Records?

How to Clean Vinyl Records?
0/50 ratings

The best record cleaner: from analytical thoughts, such as “doing dust with my discs”, to more serious questions, “how can I change the cartridge?” It is going on for a while. You think whether or not dust can damage your vinyl recordings, at the same time, dust accumulates on them and negatively affects the records during their subsequent listening. It is important to know interesting and useful information, such as “How to Clean Vinyl Records?”, Because sound quality depends on it.

The best way to clean vinyl records: there is a large number of methods for keeping vinyl records clean (methods for cleaning vinyl records from dust and dirt), but the basic initial cleaning kit should be in the home for every fan of vinyl recordings.

There are a wide range of different brushes and cleaning products, but you end up with four main options: a microfiber brush, a carbon brush, a vinyl film option (in other words, applying a layer of glue to the plate, which is dusty and removable together with a glue film) – vinyl record cleaning.

Such a “pillow”, as a rule, has the form of a block with a solid pen, which is attached to a fixed velvet material. The idea is that the side with velvet needs to be seamlessly lifted up to a rotating vinyl plate. Dirt and various dirt accumulates on the surface of the pillow. Then you need to gradually move the pillow diagonally to the edge of the recording to remove the dust.

It is important to remember: some of these pillows are sold complete with a cheap alcohol solution, often in a bottle for spraying. There are recommendations not to use any alcohol solution or its variations on its vinyl. Despite many supporters of such solutions that you can find on the Internet, alcohol (there is a high probability) will damage your records in the long run.

This brush is close to the idea of ​​a specialized pillow that is used in a similar way and designed to effectively remove dirt and other residues of dust on your vinyl plate in order to protect it and improve the sound, which is extremely important for music lovers. Carbon fibers are the best type for this kind of cleaning because these fibers are the best way to remove dirt from vinyl. The difference is that fibers can penetrate to a certain extent into the grooves, increasing the efficiency of cleaning and removing more dirt. Despite these undeniable advantages, the brush does not clear old-fashioned dirt that is “stuck” into the grooves.

How to clean a record album: it’s important to remember and know one thing: the dirt that is collected on carbon fibers can not be removed by hand because there is natural fat on the hands that will accumulate on the fibers and transferred to the plate. The brush is arranged in such a way that it cleans itself by its body.

The next tool looks like a clothes cleaner, where the roller is pulled out of the vinyl surface from the center of the outside. The dirt sticks to the surface of the roller. When the mud clogs the surface of the roller – the top layer is removed and the roller becomes clean again.

The last way that some fans of vinyl recordings are actively using is wood glue. It needs to be evenly applied and distributed over the surface of the vinyl, leave it to dry and carefully remove the film, which also removes dirt glued to the film. The potential danger is obvious, and it is worth to be afraid of this method, because it is not very reliable, so pay attention to the more detailed description of glue because of the success of the procedure for cleaning the vinyl from the dirt depends on its quality.